led-75w seriesC fixed output and dimmable switch mode led drivers constant current & constant voltage with isolation black magic thermal advantage? aluminum housing ordering options: -d: 0-10v & resistance dimmable version comes with an extra two wires +purple/-gray on the output side. -d 0-10v dimming is compatible with most quality 0-10v wall dimmers. see page 3 for additional specifcations. -pd: pwm dimmable version comes with an extra two wires +purple/-gray on the output side. pd pwm version is pwm dimmable via a positive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4 for additional specifcations. constant current - product specifcations model number output current (ma 3%) output voltage range (vdc) max. output power (w) typical effciency led75w-257-c0300- xx 300 85-257 75 91% led75w-200-c0350- xx 350 66-200 70 91% led75w-128-c0600- xx 600 42-128 75 91% led75w-085-c0900- xx 900 28-85 75 90% led75w-064-c1200- xx 1200 21-64 75 90% led75w-056-c1400- xx 1400 18-56 75 90% led75w-048-c1600- xx 1600 16-48 75 90% led75w-036-c2100- xx 2100 12-36 75 89% led75w-030-c2500- xx 2500 10-30 75 89% led75w-027-c2800- xx 2800 9-27 75 88% led75w-025-c3000- xx 3000 8-25 75 88% led75w-022-c3400- xx 3400 7-22 74.8 88% led75w-020-c3750- xx 3750 7-20 75 87% led75w-018-c4200- xx 4200 6-18 75 86% led75w-015-c5000- xx 5000 5-15 75 86% constant voltage - product specifcations model number output voltage (vdc 5%) output current range (ma) max. output power (w) typical effciency led75w-015 15 1250-5000 75 86% led75w-018 18 1050-4200 75 86% led75w-020 20 938-3750 75 87% led75w-022 22 850-3400 74.8 88% led75w-025 25 750-3000 75 88% led75w-027 27 700-2800 75 88% led75w-030 30 625-2500 75 89% led75w-036 36 525-2100 75 89% led75w-048 48 400-1600 75 90% led75w-056 56 350-1400 75 90% led75w-064 64 300-1200 75 90% led75w-085 85 225-900 75 90% led75w-128 128 150-600 75 91% led75w-200 200 88-350 70 91% led75w-257 257 75-300 75 91% class 2: us/canada us only -xx indicates dimming options are available. see options at left. blank = fxed current output electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) input over-voltage: can endure 320vac for 48 hrs, 350vac for 2 hrs frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ full load, 100v through 277v inrush current: <30.0 amps max @ 230 vac, cold start 25oc input current: 1.00 amps max maximum power: 75w current accuracy: 1% over input line variation load regulation: 3% thd: <_ 20% @ full load leakage current: 400 a typical hold up time: half cycle protection: output over-voltage, output over-current, and output short circuit protection reset by power cycling environmental specifcations minimum starting temp: -30oc maximum case temp. 90c storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5 to 55 hz/2g, 30 minutes sound rating: class a mtbf: 478,000 hours at full load and 40oc ambient conditions per mil-217f notice 2 emc: fcc 47cfr part 15 class b compliant e332160 sign components manual rev 8-31-15 ? total power: 75 watts ? input voltage: 100-277 vac nom. ? ul dry & damp location rated ? ip66 ? high power factor ? ul8750, csa 22.2, en61347, en61000-3-2, en61000-3-3 class c specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - mm ul conditions of acceptability see website for additional information 50% load pf power factor / load 60% 70% 80% 90% 100% 50% load thd thd / load 60% 70% 80% 90% 100% 1 20v a c 2 77v a c 1 20v a c 2 77v a c 0.00 0.10 0.40 0.30 0.20 0.50 0.80 0.70 0.60 0.90 1.00 0% 20% 15% 10% 30% 25% 35% 40% 45% 50% 45 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature (full load @ 120vac) 0 125 225 250 175 200 150 275 300 325 50 25 75 100 400 350 375 55 60 65 70 75 80 85 90 output red (+) blue (-) input black (l) white (n) green (gnd) dimming purple (+) gray (-) wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. 2.240.12 [ 57.03 ] 2.240.12 [ 57.03 ] 6.81 [ 173.0 ] 6.42 [ 163.0 ] 7.25 [ 184.0 ] 1.06 [ 27 ] 2.81 [ 71.3 ] 1.83 [ 46.5 ] 5.91 min [ 150 min ] 0.390.04 [ 101 ] 5.91 min [ 150 min ] 0.390.04 [ 101 ] tc = 90c max 0.24 [ 6 ] 0.16 [ 4 ] 0.31 [ 7.8 ] 0.90 [ 22.8 ] 3.21 [ 81.5 ] led75w series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 -d option: 0-10vdc and resistance dimming notes: 1. 0-10v dimmable version comes with an extra two wires +purple/-gray on the output side. 2. compatible with most 0-10v wall slide dimmers and direct 0-10v analog signal. recommended dimmer is leviton ip710 or equivalent 3. 0-10v dimmable version is not intended to dim below about 5% @ 0v or 10% @ 1.0v 4. 0-10v dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. parameters minimum typical maximum source current out of 0-10v purple wire 0 ma 2 ma absolute voltage range on 0-10v (+) purple wire -2.0 v +15 v dim (+) purple ip710 wall dimmer led75w-xx-cxxxx-d dim (-) gray (dimmer must be current-sink type control) typical dimming circuit 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v d i mmi n g i n p u t ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng i nput 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led75w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 -pd option: pwm dimming pwm in pwm positive dimming typical circuit led75w-xx-cxxxx-pd pwm (+) purple pwm (-) gray parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +28v input low level voltage range (purple wire) -2.0 0v +7.5v input high level voltage range (purple wire) +9.0 10v 28v sink current into pwm input (purple wire) 0ma 1.2ma pwm input signal frequency 200hz 1000hz pwm input signal positive duty cycle 0% 10-90% 100% notes: 1. pwm dimmable version comes with an extra 2 wires +purple/-gray on the output side. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. 3. pwm dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % led75w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
